Emulex DCP_link manual Diagnostic Programs A-9, dcpdiag3

Diagnostic Programs A-9

NOTE: A loopback connector must be used when running external loopback tests. Refer to Chapter 3

Alternatively you may copy the diagnostics to your hard drive and load and run from the hard drive.

1)Boot the system under DOS and insert the Emulex diagnostic diskette into drive A.

2)Create a subdirectory on the hard disk of your choice then copy the diagnostics to that sub directory.

3)At the DOS prompt, type

>dcpdiag3

The Diagnostic Main Menu appears. You are now ready to run the desired diagnostics.