Emulex DCP_link manual Config File

A-6 Appendix A

Selecting the On Error option allows you to determine what action will be taken when an error occurs on the selected adapter. Error actions can be set for each adapter independently.

NOTE: You must run host test #9 Downloaded Diagnostics in order to run the local tests. This test is loaded to run automatically in the default set up. Press F1 from within the test menu for help regarding the function of each test.

File - This menu displays the diagnostic control files currently in use and is used to define the control files to be used by the diagnostic program during testing.

Image File - The file which is downloaded to the adapter under test to run local side diagnostics.

Log File - File on the host which is used by the diagnostic to log error and other statistical information.

Config File - File on the host which is used by the Platform to store diagnostic menu and test setup configuration data.

Selecting the Load Configuration option loads the menu and test configuration data from the host file defined by the screen parameter

CONFIG FILE.

In the File submenu, selecting the Save Configuration option saves the current menu and test configuration setup to the host file defined by the screen parameter CONFIG FILE.

In the File submenu, selecting the Change File Name option allows the user to change the host file name pointed to by each of the screen parameters.

Status - Displays the current status of the diagnostic test(s) being run and allows the user to Abort and Continue.

Selecting the Abort option terminates the testing of the adapter highlighted in the Main menu at the end of the current test cycle while Continue Testing resumes a diagnostic run which has paused on error.

Run - In the Main menu, selecting the Run option starts the diagnostic execution on all adapter listed in the Main menu. When execution has started, selecting the Status Option will display the current status of the diagnostic run.