Software Installation 4-5

Note: If you inserted the INSTALL diskette into drive B: on a local server, press <F3>, replace A:\ with B:\, then press <Enter>.

After a short delay, the Installation Options menu appears.

Figure 4-6 The Installation Options Menu

3)Install on Local Server Only is highlighted; press <Enter>.

The INSTALL program copies several files from the INSTALL diskette to a local directory.

4)When the source files have been copied, the following message is displayed:

Installation was successful. Bring down and restart each server on which you installed the software to ensure that it uses the newest NLM files.

<Press ENTER to continue>

5)Press <Enter>, the Installation Options menu will again be displayed.

6)Select Display Log File to check for any installation problems. A list of any files that were not installed (for any reason) is displayed at the bottom of the file.

7)Select Display README Files for new additions or information.

8)Select <Exit> to continue the installation. The list of Currently Installed Products is displayed. Verify that EMULEX WAN for NetWare has been added to the list.

Page 65
Image 65
Emulex DCP_link manual After a short delay, the Installation Options menu appears