X.25 Configuration 7-15
Local DTE Address
1)Enter the access address provided by your local X.25 network service provider.
NOTE: You can leave the configuration at this point by accepting the default values for the remaining parameters. To save this configuration and return to the Internetworking Configuration menu, press <Esc>, select Yes when prompted, then press <Enter>.
2)Statistics Period - Specifies the interval (seconds) that the network interface (port) is interrogated by the driver for statistical information.
3)Interface Queue Limit - Specifies the maximum number of data packets that can be queued to this port. The range of values is 0 (unlimited) through 1024 packets. The default value is 100 packets. Selecting 0 disables the queue limit, allowing unlimited queue depth.
NOTE: The Interface Queue Limit value must be less than the Maximum Packet Receive Buffers as defined in the startup.ncf.
X.25 Authentication Options
Authentication on the X.25 link checks all inbound and outbound calls for proper access to the local and remote server.
NOTE: If you will be using
