Emulex DCP_link manual 15 Configured Wan Call Destinations

X.25 Configuration 7-27

Figure 7-15 Configured Wan Call Destinations

NOTE: If no permanent WAN Call Destinations have been defined for this interface, an error message will be displayed.

9)Highlight the desired WAN Call Destination, then press <Enter>.

Press <Esc> until you are prompted to save IPX Bind Parameters. Answer Yes to save and exit.

10)Press <Esc> again to return to the Internetworking Configuration menu.

To initiate any of the newly defined bindings on the WAN interface, issue the REINITIALIZE SYSTEM command at the server/router console OR bring down the server/router and restart.

To implement changes to an existing binding to a WAN interface, you must issue the UNBIND IPX FROM <interface_name> command at the server/router console, and then bring down and restart the server/router.