Emulex DCP_link manual Menus, A-4 Appendix A

A-4 Appendix A

1)Boot the system under DOS and insert the Emulex diagnostic diskette into drive A.

2)Create a subdirectory on the hard disk of your choice then copy the diagnostics to that sub directory.

3)At the DOS prompt, type

>Platform

The Diagnostic Platform Main Menu appears. You are now ready to configure the Platform and run the desired diagnostics.

Menus

Diagnostic configuration and operation are controlled from a series of menus containing option buttons for configuring the platform and testing of each board. A window and display bar provide configuration and testing options.

NOTE: Please refer to menus displayed on your screen. Each highlighted item below corresponds to a numbered menu selection.

Use the Left or Right arrow key to highlight the desired option and the Up or Down arrow key to select the menu item to which the option applies and press <Enter>. Use the arrow keys to highlight the desired parameter selection and press <enter>. To return to the previous menu and accept the parameter change, press <ESC>.

The Main Menu contains a scrollable list of the adapters which are currently configured in the system and the test configuration of each adapter. The window can display 4 adapters at a time. Use the Up or Down arrow keys to scroll through the entire list. The following options can be selected from the Main Menu. Note that the option applies to the highlighted item.