X.25 Configuration 7-25
NOTE: Most installations can function properly with the factory default parameters. For
3.0Advanced Configuration and Management Guide.
Binding Network Protocols to a WAN Interface
After adding and configuring the desired protocols outlined above, complete the following steps to bind a given protocol, such as IPX, to the WAN interface and to select a permanent WAN Call Destination (if applicable):
1)From the Internetworking Configuration menu, select Bindings then press <Enter>.
Figure 7-11 Internetworking Configuration
2)A new window displays a list of the Configured Protocol To Network Interface Bindings.
Figure 7-12 Configured Protocol to Bindings
3) Press <Ins> to display a list of the configured protocols.
