Emulex DCP_link manual The Configured Wan Call Destinations window is displayed

7-18 Chapter 7

2) The Configured Wan Call Destinations window is displayed:

Figure 7-7 Configured Wan Call Destinations

If no WAN Call Destinations have been configured, the list will be blank.

3)Press <Ins> to configure a new WAN Call Destination for X.25.

4)Enter a name for the new WAN Call Destination, then press <Enter>.

NOTE: WAN network interfaces must be configured before WAN Call Destinations may be created.

5)Select EMX X.25 as the wide area medium, then press <Enter>. The X.25 Call Destination Configuration window is displayed.

Figure 7-8 X.25 Call Destination Configuration