Emulex DCP_link manual Binding Network Protocols to a WAN Interface

6-14 Chapter 6

NOTE: Most installations can function properly with the factory default parameters. For non-standard applications, refer to the Novell NetWare MPR

3.0Advanced Configuration and Management Guide.

Binding Network Protocols to a WAN Interface

After adding and configuring the desired protocols outlined above, complete the following steps to bind a given protocol, such as IPX, to the WAN interface and to select a permanent WAN Call Destination (if applicable):

1)From the Internetworking Configuration menu, select Bindings then press <Enter>.

Figure 6-10 Internetworking Configuration

2)A new window displays a list of the Configured Protocol To Network Interface Bindings.

Figure 6-11 Configured Protocol to Bindings

3) Press <Ins> to display a list of the configured protocols.