Emulex DCP_link manual DCP386i Adapter Configuration, 11 DCP386i Jumper Block Placement

Hardware Configuration 2-11

DCP386i Adapter Configuration

The following diagram of the DCP386i adapter shows the location of all option setting switches and jumpers:

Figure 2-11 DCP386i Jumper Block Placement

Jumper Settings

See Figure 2-11 for the location of each jumper block.

NOTE: Jumper block J6 sets the Host Interrupt Level and SW1 sets the base I/O address for the 386 adapter. Reference the beginning of this chapter for details on these settings.

Jumper block J1 and J3 contain the factory default settings for the following options:

•PC I/O Channel Check

•Window Group Select

Reference the following factory default options for the standard Wan configuration.