Emulex DCP_link manual Chapter, 13 Binding IPX, 14 Wan Call Destination Entry

7-26 Chapter 7

4)Select the desired protocol (e.g., IPX), then press <Enter>.

5)From the Network Interface menu, select a configured WAN interface port, then press <Enter> to bind the protocol to that port.

A new window displays the parameters for binding the protocol you have chosen to the selected WAN interface.

Figure 7-13 Binding IPX

6)Press <Enter> to select a Permanent WAN Call Destination.

7)Press <Ins> to add a permanent call to the interface.

Figure 7-14 Wan Call Destination Entry

9)Press <Enter> to select a configured WAN call destination. The Configured WAN Call Destinations screen will be displayed reflecting the selection.