ENGLISH
CIRCLE SURROUND
CS-Cinema, CS-Music
Circle Surround is designed to enable
MULTI CH. STEREO
This mode is used to create a wider, deeper and more natural soundstage from two channel source material.
This is done by feeding the left channel signal to both left front and left surround speaker and the right channel signal to both right front and right surround speaker. Additionally, the center channel reproduces a mix of the right and left channel.
VIRTUAL
This mode creates a virtualized surround sound experience from a
CAUTION
NOTE for Dolby Digital Surround EX signal
*When playing Dolby Digital Surround
NOTE for 96kHz PCM audio
*AUTO, Source- DIRECT, and STEREO modes can be used when playing PCM signals with a sampling frequency of 96 kHz (such as from
*Certain DVD player models inhibit digital output. For details, refer to the player’s operation manual.
*Some DVD formatted discs featured copy protection. When using such disc, 96 kHz PCM signal is not output from the DVD player. For details, refer to the player's operation manual.
NOTE for DTS signal
*Connected
*If you press the PAUSE or SKIP button on the player while playing a DTS source, a short noise may be heard. This is not a malfunction. In such cases, select the surround mode the “DTS” or
*If DTS cinema, DTS music or
*When the analog input function has been selected, Surround mode cannot be switched to DTS cinema, DTS music or
*While signals from
*You cannot listen to
*The outputs for the VCR 1 OUT, VCR 2 OUT, TAPE OUT, and CD- R OUT output analog audio signals. Do not record from CDs or LDs that support DTS using these outputs. If you do, the
36