ENGLISH

INPUT SETUP (ASSIGNABLE DIGITAL INPUT)

 

cursor button, and press the OK button.

 

 

 

Six digital inputs can be assigned as the desired source.

 

Use this menu to select the digital input jack to be assigned to the

 

input source.

 

 

 

 

 

1. Select “INPUT SETUP” in MAIN SETUP MENU with Up or Down

 

 

 

 

 

 

 

 

 

 

 

1 I N P U T S E T U P

 

 

 

 

 

C D

: D 6 - A T

T V

: D 4 - A T

 

 

 

 

T A P E : ANA

D S S

: D 3 - A T

 

 

 

 

C D - R : D 1 - A T D V D

: D 5 - A T

 

 

 

 

 

 

V CR 1

: ANA

 

 

 

 

 

 

V CR 2

: ANA

 

 

 

 

 

 

AU X 1

: D - A T

 

 

 

 

MA I N

 

E X I T

 

 

2.

 

 

 

 

To select the input source, press Up or Down cursor button.

3. To select the digital input jack , press the Left or Right cursor buttons.

Select Dx-AT for input sources, for automatic detection of the digital input signal condition.

If no digital signal is input, the input signals to the analog input jacks will be played.

Select “Dig x” for input sources, for fixed the digital input jack. Select “ANA” for input sources for which no digital input jacks are used.

4. If you finish the setup in this sub-menu, move cursor to MAIN with Up or Down cursor buttons and press OK button.

Notes:

The TUNER is fixed to the analog input, and cannot be selected for any digital input.

When a DTS-LD or DTS-CD is playing, this setup is not available. This is to avoid noise being generated from the analog input.

If Dx-AT is selected and a DVD, compact disc or LD is fast- forwarded during playback, decoded signals may produce a skipping sound. In such cases, change the setting to DIGITAL.

SPEAKER SETUP

After you have installed the SR8200, connected all the components, and determined the speaker layout, it is now time to

perform the settings in the Speaker Setup menu for the optimum sound acoustics for your environment and speaker layout.

Before you perform the following settings, it is important that you first determine the following characteristics:

Note:

You can not entry these setup, when you use MULTI SPEAKER function.

SPEAKER SIZE

When setting the speaker size in the SPEAKER SIZE sub-menu, use the guidelines given below.

Large: The complete frequency range for the channel you are setting will be output from the speaker.

Small: Frequencies of the channel you are setting lower than 80 Hz will be output from the subwoofer.

If the Subwoofer is set to “NONE” and the front speakers are set to “Large,” then the sound may be output from both the left and right speakers.

2 - 1 S P E AK E R S S I Z E

T HX S P KR S Y S T EM : Y E S

S UBWOOF E R

 

:

Y E S

F RON T L / R

 

:

SMA L L

C E N T E R

 

:

SMA L L

S URROUND

L / R

:

SMA L L

S URR . BACK

 

:

1 CH

S URR . BACK

S I Z E

:

SMA L L

MA I N

 

N E X T E X I T

1. Select “SPEAKER SETUP” in MAIN SETUP MENU with Up or Down cursor button, and press the OK button.

2. To select the each speaker , press Up or Down cursor button.

3. To select the setting of size to each speaker, press the Left or Right cursor buttons.

4. If you finish these setup, move cursor to “NEXT” with Up or Down cursor button and then press OK button to go to next page.

THX SPEAKER SYSTEM

YES : If you use full THX speaker systems which are approved by LUCASFILM LTD. The front, center and surround speaker size will be “Small” and the subwoofer will be “Yes”.

You need to set number of surround back speaker only. NO : You desire to set each speaker size setup.

SUBWOOFER:

YES: Select when a subwoofer is connected.

NONE: Select when a subwoofer is not connected.

FRONT L/R

LARGE: Select if the front speakers are large sized.

SMALL: Select if the front speakers are small sized.

If “NONE” is selected for the Subwoofer setting, then this setting is fixed to “Large.”

CENTER

NONE: Select if no center speaker is connected.

LARGE: Select if the center speaker is large sized.

SMALL: Select if the center speaker is small sized.

SURROUND L/R

NONE: Select if no surround left and right speakers are connected. LARGE: Select if the surround left and right speakers are large sized. SMALL: Select if the surround left and right speakers are small sized.

SURR. BACK

NONE: Select if no surround back left and right speakers are connected.

2CH: (Preout only) Select if surround back left and right speakers are connected.

1CH: Select if the one surround back speaker connected.

If “None” is selected for the Surround L/R setting, then this setting is fixed to “None.”

Required for enjoying THX Surround EX audio. Lucasfilm/THX recommends the use of two Surround Back speakers to enjoy the full potential of THX Surround EX.. However, if you are unable to position two speakers in your listening environment, a single surround speaker can be used. In this case, connect this speaker to Surr Back Left Speaker terminal and you will also need to make the appropriate setting

SURR BACK=1CH

SURR. BACK SIZE

LARGE: Select if the surround back speakers are large sized.

SMALL: Select if the surround back speakers are small sized.

If “None” is selected for the Surround L/R setting, then this setting is not available.

28

Page 32
Image 32
Marantz SR8200 manual Speaker Setup, Speaker Size, Six digital inputs can be assigned as the desired source

SR8200 specifications

The Marantz SR8200 is a remarkable AV receiver that has garnered attention from audio enthusiasts for its exceptional performance and advanced features. Released as part of Marantz’s prestigious lineup, it showcases a perfect blend of powerful audio capabilities and sophisticated technology, making it an ideal choice for home theater setups.

One of the standout features of the SR8200 is its multi-channel amplifier, which delivers up to 110 watts per channel across seven channels. This capability ensures that users can experience immersive surround sound, whether they are watching movies or listening to music. The amplifier utilizes a high-current design, allowing it to drive demanding speakers with ease, contributing to an overall dynamic listening experience.

In terms of audio technologies, the Marantz SR8200 is equipped with DTS and Dolby Digital decoding, providing support for a variety of surround sound formats. These technologies enhance the audio experience by delivering crisp and detailed sound, effectively transporting listeners into the heart of their favorite entertainment. Additionally, the receiver incorporates Marantz's proprietary HDAM (Hyper-Dynamic Amplifier Module) technology. This ensures low noise levels and high-speed response, further improving sound quality across the frequency spectrum.

The SR8200 also features a powerful DSP (Digital Signal Processing) engine, which allows for various audio modes and surround processing options such as 5.1 and 7.1 channel setups. Users can customize their audio experience to match their preferences or the specifics of their room layout. Moreover, the receiver is equipped with an extensive array of input and output options, including multiple HDMI ports, component video inputs, and analog connections, making it versatile for various audio and visual sources.

For ease of use, the SR8200 comes with an intuitively designed remote control and an on-screen display that simplifies navigation through settings and features. It also includes a room calibration system, which analyzes the acoustics of the room and automatically adjusts the speaker settings to ensure optimal sound staging.

In conclusion, the Marantz SR8200 represents a high-quality AV receiver that combines powerful amplification, advanced audio technologies, and user-friendly features. Its ability to deliver stunning audio performance makes it a worthy investment for enthusiasts looking to enhance their home theater experience. With its robust build quality and stylish design, the SR8200 is not just an audio device, but a key component in creating a rich and engaging entertainment environment.