![](/images/new-backgrounds/1174523/174523163x1.webp)
Frame Relay Configuration 6-5
communicate with three remote sites using a minimum of 32 Kbps sustained bandwidth, the physical interface must be able to support at least 3 x 32 Kbps = 96 Kbps. You should also consider traffic pattern characteristics (bursty or sustained) when specifying interface speed.
Encoding Option - Corresponds to the encoding set on the physical line to which the Emulex Frame Relay router is attached. It can be NRZI (nonreturn to zero inverted) or NRZ (nonreturn to zero).
Destination (Partner) - Destination name at the remote end of a PVC that connects communication partners.
DLCI -
When you have completed all the planning steps for the Frame Relay connections, configure your Emulex Frame Relay software as described below.