Carrier Air Conditioner 48TJD, TJF004, TJF005-007, and 48TJE Product Data Overview

	STANDARD		DURABLADE		ECONOMI$ER		CORNER		CORNER		CORNER			CORNER
UNIT	UNIT		ECONOMIZER				WEIGHT		WEIGHT		WEIGHT			WEIGHT
48TJ	WEIGHT		WEIGHT		WEIGHT		(A)		(B)			(C)			(D)
	Lb	Kg	Lb	Kg	Lb	Kg	Lb	Kg	Lb	Kg	Lb		Kg	Lb		Kg
E/F004	460	209	34	15.4	47	21.3	140	63.5	105	47.6	159		72.1	56		25.4
D/E/F005	470	213	34	15.4	47	21.3	142	64.4	106	48.1	162		73.5	60		27.2
D/E/F006	490	222	34	15.4	47	21.3	150	68.0	115	52.2	160		72.6	65		29.5
D/E/F007	565	256	34	15.4	47	21.3	165	74.8	136	61.7	200		90.7	64		29.0

CONNECTION SIZES

A11/16″ Dia [27] Field Power Supply Hole

B3/4″-14 NPT Condensate Drain

C1/2″-14 NPT Gas Connection

NOTES:

1. Dimensions in [ ] are in millimeters.

2. Center of gravity.

3. Direction of airflow.

4.On vertical discharge units, ductwork to be attached to accessory roof curb only. For horizontal dis- charge units, field-supplied flanges should be attached to horizontal discharge openings, and all ductwork should be attached to the flanges.

5.Minimum clearance (local codes or jurisdiction may prevail):

a.Between unit, flue side and combustible surfaces, 36 inches.

b.Bottom of unit to combustible surfaces (when not using curb), 1 inch. Bottom of base rail to combustible surfaces (when not using curb) 0 inches.

c.Condenser coil, for proper airflow, 36 in. one side, 12 in. the other. The side getting the greater clearance is optional.

d.Overhead, 60 in. to assure proper condenser fan operation.

e.Between units, control box side, 42 in. per NEC.

f.Between unit and ungrounded surfaces, control box side, 36 in. per NEC.

g.Between unit and block or concrete walls and other grounded surfaces, control box side, 42 in. per NEC.

h.Horizontal supply and return end, 0 inches.

6.With the exception of the clearance for the condenser coil and combustion side as stated in notes 5a, b and c, a removable fence or barricade requires no clearance.

7.Units may be installed on combustible floors made from wood or Class A, B, or C roof covering material if set on base rail.

8.The vertical center of gravity is 1′-6″[457] up from the bottom of the base rail.

BOTTOM POWER CHART, THESE HOLES REQUIRED FOR USE WITH ACCESSORY PACKAGES — CRBTMPWR001A00, (POWER AND CONTROL) AND CRBTMPWR003A00

(POWER, CONTROL, AND GAS)

	THREADED			WIRE			REQURED
CONDUIT SIZE					USE	HOLE SIZES (MAX.)
			1/2″		24 V		7/8″ [22.2]
			3/4″	Power			11/8″ [28.4]
		1/2″ FPT			Gas		11/4″ [31.8]

Fig. 6 — Base Unit Dimensions

8