Emulex DCP_link manual Software Configuration

Software Configuration 5-7

Figure 5-4

6)Review the default values in the Board Configuration menu, and makes changes as needed.

NOTE: Refer to Chapter 2 of this guide to review the default configuration information used while installing the Emulex DCPx86i/e adapter. For non-standard installations, please refer to the Emulex DCP_link Advanced Configuration Manual.

7)Once you have finished reviewing the default settings, press <Esc> and select Yes to save changes to the board configuration.

Note: Any conflicts with the chosen hardware parameters will cause error messages to be displayed. Please contact Emulex technical support if conflicts cannot be resolved.

8)The Configured Boards window is redisplayed with the latest configuration changes. Note that the board status is Enabled.