Diagnostic Programs A-5
•Hardware - This submenu displays the test configuration of the board highlighted in the Main Menu and allows you to change various parameters such as “Window Size,” “Window Address,” and “Interrupt Level”. In the submenu use the arrow keys to highlight the item you wish to change and the “Change Selection” option. Press <enter> and use the arrow keys to highlight the new parameter value from the displayed list. Press enter then press <ESC> to return to the Hardware submenu. Use the Accept Changes option to save the change or the Restore Changes to return the parameter to its original value.
•From the Hardware submenu, select the product for the board you have installed.
•Test - This submenu displays a summary of the current diagnostic settings. Here you may select diagnostic tests, the order in which they will be run, number of passes and the action to be taken if an error is encountered on the adapter.
The Host or Local submenu option displays a scrollable list of tests available on the host or local side logic of the adapter under test. You may enable or disable the tests and change the order in which they are run. The test list window displays 18 tests at a time.
To view or select more tests use the arrow keys to highlight the last test in the window and continue pressing the down arrow to scroll forward. To scroll backwards press the up arrow. Alternately, you may use the Page Up or Page Down key to scroll whole pages at a time. The following options are available from the Host or Local submenus:
−All On - Enables all tests in the displayed list.
−All Off - Disables all tests in the displayed list.
−On - Enables the highlighted test.
−Off - Disables the highlighted test.
−Move - Allows the highlighted test to be moved to another position in the test list.
−Default - Selects the default test list.
The Passes option sets the number of passes that will be run on the Host side. The number of Local side passes is a selectable multiple of the number of Host side passes.
