DRIVERS INSTALLATION
Installing LAN Drivers for Windows NT
Follow the steps below to install the PCI Ethernet/LAN drivers Windows NT 4.0.
1.Under the Windows NT 4.0 environment, click Start à Control Panel. Double click Network à Adapters à Add.
2.Select “Have disk … ” and insert the floppy diskette containing the Ethernet drivers for Windows NT 4.0 into the FDD drive, then click OK.
3.Click OK à Close, and then enter IP address.
4.Restart the system for changes to take effect.
Installing LAN Drivers for Windows 2000
Follow the steps below to install the PCI Ethernet/LAN drivers Windows 2000.
1.Under the Windows 2000 environment, click Start à Control Panel. Double click System à Hardware à Device Manager à Other Devices.
2.
3.Click Driver à Update Driver à Next.
4.Now select “Display a list of the known drivers for this device so that I can choose a specific driver.”
5.Insert the floppy diskette containing the Intel Ethernet drivers into the FDD drive. Click OK and select “Intel PRO/100 VE Network connection.”
6.Click Next à Next à Finish. Close all tasks and restart the computer.
70 | I815E User’s Manual |
