Nortel Networks Option 11C Mini manual Installing the chassis on a wall in a horizontal position

Chapter 9 — Installing the chassis Page 121 of 332

Installing the chassis on a wall in a horizontal position

Items required

To install the chassis on a wall in a horizontal position, you require the following items:

•equipment layout plan

•one left shelf bracket

•one right shelf bracket

•eight 1 in. #12 wood screws supplied in the bracket kit (or other appropriate fasteners) to fasten the wall shelf brackets to the wall

•one 3/4 in. (20 mm.) piece of plywood fastened to the wall

The NTTK11 bracket kit contains all of the above items, with the exception of the equipment layout plan and the plywood.

CAUTION

An Option 11C Mini chassis is 30 lb. (13.5 kg) with circuit cards installed. Make sure that you fasten the equipment securely to the wall. Use fasteners, designed to hold securely to the type of surface that will support the equipment. When using 3/4 in. (20 mm) plywood, or other similar material as a backboard, make sure you attach it directly to the wall studs in a minimum of six places.

Refer to Figure 26 on page 122 for guidelines on how to position system components.

Option 11C Mini Planning and Installation Guide