Nortel Networks Option 11C Mini manual Optional circuit cards, NT8D14 Universal Trunk card

Page 156 of 332 Chapter 12 — Installing the circuit cards

Note 1: You can only place the NTDK16 Digital Line Card in slot 4 of the Main Chassis.

Note 2: The Option 11C Mini system does not require the NTDK16

Digital Line Card to operate.

Procedure 10

NTDK16 48-port Digital Line Card installation

1Insert the NTDK16 card in Slot 4 of the Main Chassis.

2Lock the latches on the card.

Note 1: The NTDK16 provides three independent loops (loops 4, 5, and 6). When the time comes to program this card in software, configure it as cards 4, 5, and 6 separately.

Note 2: Three LEDs provide card status.

Note 3: The NTDK16BA version of this card is not compatible with the

NTDK91AA and the NTDK91AB Main Chassis.

—————————— End of Procedure ——————————

Optional circuit cards

NT8D14 Universal Trunk card

The NT8D14 Universal Trunk card provides eight analog trunks which can function in the modes shown in Table 28.

You can install this line card in slots 1 through 3 in the Main Chassis or slots 7 through 10 in the Chassis Expander.

Procedure 11

Universal Trunk card installation

1Set the jumpers for the NT8D14 Universal Trunk circuit card according to Table 28.

553-3021-209 Standard 3.00 April 2000