Nortel Networks Option 11C Mini manual Activating a default model without a character display

Page 248 of 332 Chapter 17 — Connecting the telephones

Activating a default model without a character display

Procedure 36

Activating a default model telephone without a character display

1Plug the telephone set into the jack and wait 20 seconds before you lift the handset. If you do not receive dial tone, replace the handset and wait another 10 seconds before going off-hook again. Repeat this procedure until you receive dial tone.

Note: The system requires the 20 second time interval to determine if the set is new or if it is being relocated using the Modular Telephone Relocation feature.

2Press the pound key (#) to select the default model.

3Press the pound key (#) again to select the default extension number.

You hear a short, high-pitched beep which lasts four seconds followed by silence (relocation tone).

Note: If the extension number is already in use by another telephone, you hear three beeps followed by continuous dial tone (special dial tone).

To accept the default extension number press the pound key (#).

To select a new extension number, manually enter an extension number and press the pound key.

If the extension number is not available for use, you hear a fast, high-pitched broken tone (overflow tone). This happens when you select an extension number manually or when extension numbers are entered for additional keys. A default extension number is not offered if it is not available. You must repeat Step 3 on page 248, and you must manually enter a new extension number.

Note: If other keys require secondary extension numbers, you are prompted until you enter all of the required extension numbers for the model. These extension numbers cannot be defaulted. You are prompted for each additional extension number with three beeps followed by continuous dial tone (special dial tone). When you are programming an extension number, the lamp associated with that number on the telephone is lit.

—————————— End of Procedure ——————————

553-3021-209 Standard 3.00 April 2000