26
26 27
ATW1: Selects the automatic tracing white balance
mode. The camera will constantly check the color
temperature of the light source and adjust the white
balanceautomatically.Operatingcolortemperature
rangeisapprox.2700K-6000K.
ATW2: Selects the automatic tracing white balance
mode under a sodium lamp. The camera will adjust
the white balance automatically under a sodium
lamp.Operatingcolortemperaturerangeisapprox.
2000K-6000K.
AWC: Selects the automatic white balance control
mode. This adjustment is suitable for a location
wherealightsourceisstable.Operatingcolortem-
peraturerangeisapprox.2000K-10000K.
Default: ATW1
Note:
•Underthefollowingconditions,colormaynotbe
faithfully processed. In these cases, select "AWC".
•Whenshootingasubjectwhosemajorpartisa
thick color
•Whenshootingblueskyorsunatsunset
•Whenshootingasubjectwhoseluminanceis
too low
•When"AWC"isselected,clickthe[Set]button.
[Red gain]
Adjust the red color of images.
Whenthecursorismovedinthe"+"direction,thered
color will become thicker. When the cursor is moved in
the "–" direction, the red color will be thinner. Click the
[Reset] button to reset the color to the default.
Default: 128
[Blue gain]
Adjust the blue color of images.
Whenthecursorismovedinthe"+"direction,theblue
color will become thicker. When the cursor is moved in
the "–" direction, the red color will be thinner. Click the
[Reset] button to reset the color to the default.
Default: 128
[DNR]
The digital noise reduction function reduces noise auto-
matically under the condition of low illuminance. Select
an effect level "High" or "Low" for the digital noise
reduction.
High: High DNR, afterimage remains
Low: Low DNR, reduces afterimage
Default: High
[Chroma gain level]
Adjusts the chroma level (color density).
Whenthecursorismovedinthe"+"direction,thecol-
ors will become thicker. When the cursor is moved in
the "–" direction, the colors will be thinner. Click the
[Reset] button to reset the color to the default.
Default: 128
[Aperture level]
Adjust the aperture level (outline compensation).
Images will be sharper when the cursor is moved in the
"+"direction,andwillbesofterwhenthecursoris
moved in the "–" direction. Click the [Reset] button to
reset the color to the default.
Default: 16
[Pedestal level]
Adjust the black level of images by moving the cursor.
Whenthecursorismovedtothe"+"direction,images
will become brighter. When the cursor is moved to the
"–" direction, images will be darker. Click the [Reset]
button to reset the color to the default.
Default: 128
[Close] button
Click this button to quit the "Image adjust" setup menu.