[Image capture size]
Select the capture size of images to be transmitted from the following.
When "4:3" is selected for "Aspect ratio" QVGA/ VGA/ 1280x960*1
When "16:9" is selected for "Aspect ratio" 320x180/ 640x360/ 1280x720*1
Default: VGA
*1 SP105
Configure the schedule settings of the FTP periodic image transmission [FTP img. trans.]
Click the [FTP img. trans.] tab on the "Network" page. (☞ Pages 13 and 14: How to display/operate the setup menu)
The schedule settings of the FTP periodic image transmission can be configured in this section. Refer to page 49 for further information about the settings relating to the FTP periodic image transmission.
How to set the schedules
Step 1
Check the check box of the desired day of the week of "FTP image transmission schedule".
→The selected day of the week will be validated for the schedule.
Step 2
To designate time, click [C] and select the desired "hour" and "minute".
When not designating time, check the checkbox of "24h".
Step 3
Click the [Set] button after completing the settings.
→The result will be displayed at the bottom of the window.
50
