Note:
•When "On" is selected, only "Unicast port (AUTO)" will be available for "Transmission type".
•When "On" is selected, it may take time to start dis- playing H.264 images.
•When "On" is selected, H.264 images may not be displayed depending on the number of the concur- rent access user availability, etc.
•When "On" is selected, only IPv4 access is avail- able.
•When "On" is selected for either "H.264(1)" or
"H.264(2)", the maximum concurrent access num- ber is equal to or less than 10 users.
[Image capture size]
Select the image capture size from the following.
•When "4:3" is selected for "Aspect ratio" H.264(1): QVGA/ VGA/ 1280 x 960*1 H.264(2): QVGA/ VGA
•When "16:9" is selected for "Aspect ratio" H.264(1): 320x180/ 640x360/ 1280x720*1 H.264(2): 320x180/ 640x360
Default:
H.264(1): 1280x960*1
VGA*2
H.264(2): VGA
*1 SP105
*2 SP102
[Transmission priority]
Select "Constant bit rate" or "Frame rate" for the H.264 transmission mode.
Constant bit rate: H.264 images will be transmitted with the bit rate selected for "Max bit rate (per cli- ent)*".
Frame rate: H.264 images will be transmitted with the frame rate selected for "Frame rate*".
Default: Constant bit rate
Note:
•When "Frame rate" is set for "Transmission priority", number of users who can access the camera may be limited more.
[Frame rate*]
Select a frame rate for H.264 images from the following. 1fps/ 3fps/ 5fps*/ 7.5fps*/ 10fps*/ 12fps* (PAL model)/ 15fps*/ 20fps*/ 30fps*
Default: 30fps*
Note:
•When "Frame rate" is selected for "Transmission priority", this setting is available.
•"Frame rate*" is synchronized with "Max bit rate
(per client)*". For this reason, the frame rate may be lower than the specified value when any value marked with an asterisk (*) is selected.
[Max bit rate (per client)*]
Select a H.264 bit rate per a client from the following. 64kbps/ 128kbps*/ 256kbps*/ 384kbps*/ 512kbps*/ 768kbps*/ 1024kbps*/ 1536kbps*/ 2048kbps*/ 3072kbps*/ 4096kbps*/ 8192kbps* SP105 / Unlimited*
Default:
H.264(1): 4096kbps* |
| |
SP105 | ||
1536kbps* |
|
|
| SP102 | |
H.264(2): 1536kbps* |
| |
*"8192kbps*" is available only when the image cap- ture size is "1280x960" or "1280x720".
*"64kbps" and "128kbps" are available only when the image capture size is "QVGA", "VGA", "320x180", or "640x360".
*"Unlimited*" is available only when "Frame rate" is selected for "Transmission priority".
Note:
•The H.264 bit rate is synchronized with "Bandwidth control(bit rate)" on the [Network] tab of "Network" page (☞ page 45). For this reason, the bit rate may be lower than the value when any value with an asterisk (*) on the right is selected.
•When "Unlimited*" is selected, the number of users who can access H.264 images will be limited to "1".
•It is impossible to select "Unlimited*" for both
"H.264(1)" and "H.264(2)".
[Image quality]
Select the image quality of H.264 images from the fol- lowing.
Fine(Image quality priority)/ Normal/ Low(Motion prior- ity)
Default: Normal
21
