Set mask areas
When "Off" is selected for "Back light compensation(BLC)" (☞ page 24), it is possible to compensate for backlight by masking brighter areas.
Step 1
Display the "Image adjust" setup menu. ☞ Page 24)
Step 2
Click the [Start] button of "Mask area".
→Borders will appear and the image displayed on the [Image/Privacy] tab will be divided.
It will be divided into 48 (6x8) |
|
SP105 | |
It will be divided into 16 (4x4) |
|
SP102 |
Note:
•When the aspect ratio is "4:3", areas can be masked. If the aspect ratio is changed to "16:9" after completion of area masking, the setting of area masking is maintained.
Step 3
Click the divided areas to be masked.
→The clicked areas will be masked and will become white. To cancel masking, click the area again.
Step 4
Click the [End] button after completing masking areas.
→The borders on the image displayed on the [Image/ Privacy] tab will disappear.
Note:
•When the [Reset] button is clicked, masking for all the masked areas will be canceled.
27
