IdeaPad Z500/P500 Hardware Maintenance Manual
1080 Fan assembly and Heat Sink assembly
For access, remove these FRUs in order:
•• “1010 Keyboard” on page 32
•• “1020 Optical drive” on page 34
•• “1030 Base cover” on page 36
•• “1040 Battery pack” on page 39
Figure 8. Removal steps of fan assembly and heat sink assembly
Detach the fan connector in the direction shown by arrow 1 , and then remove three screws 2, two screws 3 and one screw 4.
3
2
3
2
4
1
When installing: Make sure that the fan connector is attached firmly to the system board.
Step | Screw (quantity) | Color | Torque |
|
|
|
|
2 | M2 × 3.2, | Black | 3.62 |
|
|
|
|
3 | M2 × 2.5, | Black | 3.62 |
|
|
|
|
4 | M2.5 × 6, | Black | 8.03 |
|
|
|
|
46
