Nortel Networks Option 11C Mini manual Creating, changing, and removing model telephones

Appendix B – Changing preprogrammed data Page 325 of 332

To remove all access codes, enter the following commands:

REQ	OUT	Action request
TYPE FFC		FFC = Flexible feature codes
CUST 0-31		Customer Number
FFCT YES,(NO)		FFC Confirmation tone
ALL YES		Remove all access codes
CODE<CR>		Return to REQ
REQ END		End program

Creating, changing, and removing model telephones

If you need a model telephone different from the default models provided in Option 11C Mini software, use overlays to design the models. Use the information in Table 104.

Table 104

Design model telephones

Task	Overlay
Create model telephones:
Analog telephones	LD 10
(500/2500 type telephones)
Digital telephones	LD 11
Get information about model telephones	LD 20
	(printout)

If you require additional help when creating model telephones and trunks, refer to the Option 11C Software guides.

Option 11C Mini Planning and Installation Guide