Nortel Networks Option 11C Mini Installing the Reichle Masari cross-connect terminal Germany

Page 172 of 332 Chapter 13 — Installing and connecting the cross-connect terminal

Figure 48

Typical BIX cross-connect terminal layout

Main Chassis

Cable Card 1	AUX cable
Cable Card 2
	PFTU
Cable Card 3
Cable Card 4/6
Cable Card 5/6

	Telephones
Chassis Expander	Trunks
	and
Cable Card 7	Miscellaneous
Cable Card 8
Cable Card 9
Cable Card 10
	553-9026

Note: One 25-pair cable contains Card 4 and Card 6 (units 0-7). Another 25-pair cable contains Card 5 and Card 6 (units 8-15).

Installing the Reichle Masari cross-connect terminal (Germany)

Procedure 20 describes how to install the Reichle Masari cross-connect terminal for Germany.

Procedure 20

Installing the Reichle Masari cross-connect terminal (Germany)

1Refer to the equipment layout plan to determine where to place the cross-connect terminal.

2Layout the terminal blocks as shown in Figure 49.

553-3021-209 Standard 3.00 April 2000