Nortel Networks Option 11C Mini manual Conflicts with Flexible Feature Codes

Page 324 of 332 Appendix B – Changing preprogrammed data

Conflicts with Flexible Feature Codes

If the preprogrammed Flexible Feature Codes (FFC) conflict with the programming required for the Option 11C Mini system, remove the data from the system using LD 57.

LD 57

To change one or more access codes, enter the following commands:

REQ	CHG, END	Change or end
TYPE	FFC	FFC = Flexible feature codes
CUST	0-31	Customer Number
FFCT	YES,(NO)	FFC Confirmation tone
CODE	aaaa	Enter access code prompt (aaaa)
AAAA	xx	Enter the new access code prompt
		(AAAA)
CODE	<CR>	Return to REQ
REQ	END	End program

To remove one access code, enter the following commands:

REQ	OUT	Action request
TYPE	FFC	FFC = Flexible feature codes
CUST	0-31	Customer Number
FFCT	YES,(NO)	FFC Confirmation tone
ALL	NO	Remove specific access code
CODE	aaaa	Enter access code prompt (aaaa)
AAAA	xx	Enter the new access code prompt
		(AAAA)
CODE	<CR>	Return to REQ
REQ	END	End program

553-3021-209 Standard 3.00 April 2000