Nortel Networks Option 11C Mini manual Conflicts with Call Park extension numbers

Page 322 of 332 Appendix B – Changing preprogrammed data

Conflicts with Call Park extension numbers

Extension numbers for system call park are preprogrammed for the Central Answering Position. To remove this data from the system, load LD 50 and respond to the prompts as follows:

LD 50

REQ OUT

TYPE CPK

CUST 0

SPDN XXXX “XXXX” = Value of Call Park extension

Repeat for each Call Park extension you want to remove.

Conflicts with SDI ports

Five SDI/ESDI ports are preprogrammed on the Option 11C Mini system. Ports 8 and 9 are associated with the Meridian Mail Mini. Ports 0, 1 and 2 are associated with the NTDK97 MSC card. You cannot remove port 0; however, you can remove any of the remaining ports using LD 17 as follows:

LD 17

REQ CHG

TYPE CFN

ADAN OUT TTY X “X” = the TTY that you are removing.

Conflicts with the SPRE code

If the preprogrammed SPRE code conflicts with the programming required for the Option 11 system, use LD 15 to remove it. For customer 0 enter the following in response to the SPRE prompt:

LD 15

SPRE Xy “y” = the value of the SPRE code

Note: To define a new SPRE code, type a space and enter the new number.

553-3021-209 Standard 3.00 April 2000