Nortel Networks Option 11C Mini manual Printing model information, Removing model telephones

Page 328 of 332 Appendix B – Changing preprogrammed data

Printing model information

To print information about model telephones, use LD 20.

Analog telephones

LD 20

REQ PRT

TYPE 500 M

MODL YYY “YYY” = the telephone model number. If you want to print all of the models for this telephone type, leave this value blank.

Digital telephones

Note: To print M3000 telephone models, you must enter “TYPE 3000

M”. If you enter “TYPE 2XXX M”, you print all the Meridian Digital

Telephone models except the M3000.

LD 20

REQ PRT

TYPE 2XXX M or 3000 M “XXX” = the telephone type

MODL YYY “YYY” = the telephone model number (between 1 - 127). If you want to print all of the models for this telephone type, leave this value blank.

Removing model telephones

Use LD 10 to remove analog telephone models and LD 11 to remove digital telephone models. Respond as follows to the prompts in either overlay:

LD 10 or LD 11

REQ	OUT
TYPE	XXXX M “XXXX” = telephone type for the model
	you are removing (Example: 500, 2006,
	2317, 2216, 3000.)
CUST	0
MODL	YYY “YYY” = the model number associated
	with the telephone type you are removing
	(Valid range is 1-127).

553-3021-209 Standard 3.00 April 2000