Nortel Networks Option 11C Mini manual Installing the chassis on a table, Items required

Page 126 of 332 Chapter 9 — Installing the chassis

Figure 29

Chassis installed on a wall in a horizontal position

8If you want to install a Chassis Expander on a wall in a horizontal position, repeat the above steps for the Chassis Expander. Refer to the equipment layout plan for the measurements and where to position the Chassis Expander.

—————————— End of Procedure ——————————

Installing the chassis on a table

Items required

To install the chassis on a table, you require the following items:

•equipment layout plan

•four rubber feet

•four #8-32 machine screws

The NTTK10 kit contains all of the above items, with the exception of the equipment layout plan.

Refer to Figure 30 for guidelines on how to position system components.

553-3021-209 Standard 3.00 April 2000