Installing the Program
The program is installed to the navigation sys-
tem using the application disc.
This is not necessary if your dealer al-
ready performed the installation.
When installing the program, you carry out
the following operations. When all the setup
procedures are completed, you can use the
navigation system.
1Insertthe disc while the vehicle is parked.
j
2Selectthe language used for the navigation
system.
j
3Setthe time difference.
CAUTION
Oncethe installationof theprogram starts, do
notstop the engine of your vehicle nor switch off
thenavigation system until the installation is
completedand the following Mapscreen with
currentposition appears.
1 Parkyour vehicle in a safe place.
Leave the engine on,and make sure that the
parking brake is applied.
2 Insertthe Pioneer DVD Map Disc into
the disc loading slot of the navigation sys-
tem.
When the upgraded program has been found,
installation of the program starts immediately.
pDonot insert anything other than a disc
intothe disc loadingslot.
pIf you cannot insert a disc completelyor if
aninserted disc is notrecognized, check
thatthe label side of thedisc is up. Press
EJECTbutton to eject the disc, and check
thedisc for damage before inserting the
discagain.
3 Touch[Yes/Oui].
When you start the navigation system for the
first time, you will see a confirmation message
asking if you wish to select another language.
English is the default language of the naviga-
tion system. If desired, you can select another
language as shown.
pTokeep English, touch [No/Non].
pWhenyou want to select another language,
touch[Yes/Oui], and proceed to the next
step.
4 Selectthe language from the list.
Touchthe language you want to use.
pThelanguage selectedhere is reflected for
theNavigation functions (e.g.,Destination
search,etc.) only.
=Referto Language Selection inSystem
Optionson page 81.
Installation of the program begins in the lan-
guage that you chose.
When the installation is complete, the opening
display appears.
Appendix
En
156
Appendix