Chapter
05
Editing the Navigation Utilities
4Degree of learning
Sensor learning situations for distance (Dis- tance), right turn (Right Turn), left turn (Left Turn) and 3D detection (3D) are indi- cated by the length of bars.
pWhen tires have been changed or chains fitted, turning on the Speed Pulse allows the system to detect the fact that the tire diameter has changed, and automati-
cally replaces the value for calculating distance.
pIf
matically.
5Speed
Speed detected by the navigation system is indicated. (This indication may be different from the actual speed of your vehicle, so please do not use this instead of the speed- ometer of your vehicle.)
6Acceleration or deceleration/Rotational speed
Acceleration or deceleration velocity of your vehicle is indicated. Also, rotational speed when your vehicle turns to left or right is shown.
7Inclination
Degree of slope of the street that you are currently running is indicated.
To clear values...
If you want to delete the learned results stored in [Distance], [Speed Pulse] or [Learning Sta- tus], touch the relevant result, then touch [Clear].
pThe navigation system can automatically use its sensor memory based on the outer dimensions of the tires.
Checking the connections of leads and installation positions
Check that leads are properly connected be- tween the navigation system and the vehicle. Please also check whether they are connected in the correct positions.
1Touch [Settings] in NAVI MENU, then touch [Hardware Info].
2Touch [Connection Status].
The Connection Status screen appears.
1 
2 3 4 5 6 7
1Speed Pulse
The Speed Pulse value detected by the navi- gation system is shown. “0” is shown while the vehicle is stationary.
2GPS Antenna
Indicates the connection status of the GPS antenna, the reception sensitivity and from how many satellites the signal is received.
If the signal is received correctly, [OK] is dis- played. If reception is poor, [NOK] appears.
3Installation Position
The installation position of the navigation system is shown.
If installed correctly, [OK] appears. Indicates whether the installation position of the navi- gation system is correct or not. When the navigation system is installed at an extreme angle exceeding the limitation of the instal- ling angle, [Incorrect angle] will be dis- played. When the angle of the navigation system has been changed, [Excessive vi- bration] will be displayed.
4Parking Brake
When the parking brake is applied, [On] is displayed. When the parking brake is re- leased, [Off] is displayed.
78
En
