
Chapter
08
Using the AV Source (Pioneer AV Equipment)
Operate the external unit by using 1 KEY — 6 KEY
The external unit can be operated by transmit- ting the operating commands set to 1 KEY — 6 KEY.
pOperation varies depending on the external unit connected. (In some cases, the exter- nal unit may not respond.)
%Touch desired key ([1 KEY] — [6 KEY]) to operate the external unit.
Operate the external unit by using F1 — F4
The external unit can be operated by transmit- ting the operating commands set to F1 — F4.
pThe operating commands set to F1 — F4
vary depending on the external unit.
pSome functions may not be used until you touch and hold the key.
%Touch [F1] — [F4].
The operation command is transmitted to the external unit.
Switching the automatic and manual function
You can turn automatic and manual function on or off.
You can switch between Auto and Manual functions of the external unit connected. Initially, this function is set to Auto.
pOperating commands set for Auto and Manual operations vary depending on the external unit connected.
%Touch [A/M].
Touching [A/M] switches between [Auto] and [Manual].
AV Input (AV)
CAUTION
For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, you must stop in a safe place and apply the parking brake (refer to Parking brake in- terlock on page 20).
Selecting AV as the source
%Touch
=For details, refer to Selecting an AV source on page 39.
pIf you want to switch AV source, select
[Video] in [AV1 Input] or [AV2 Input].
=For details, refer to Setting the video input on page 139.
130 En