| Chapter |
Using the AV Source (Pioneer AV Equipment) | 08 |
|
|
Selecting an XM channel directly
You can select an XM channel directly by en- tering the desired channel number.
1Touch [Direct].
2Touch 0 — 9 to input the desired chan- nel number.
To cancel the input numbers, touch [Clear].
3While the input number is displayed, touch [Enter].
The entered XM channel is selected.
4Touch [Back].
You can return to the previous display.
Using the MyMix function
The MyMix function memorizes the song title and artist name of the song currently being re- ceived. When a track that matches the memor- ized song title and artist name is being broadcast on a station other than the one you are listening to, you will be alerted, and you can switch the station to listen to that song.
pA track itself is NOT downloaded BUT only the song title and the artist name are mem- orized.
Memorizing the song title and the artist name of a song
The song title and artist name of the song you are listening to can be memorized.
%Touch [Memo].
The song title and artist name of the song you are listening to are memorized, and a confir- mation message appears.
pUp to 12 song titles and artist names can be memorized. Trying to save more than
12 tracks will overwrite old ones.
pYou cannot memorize the song title or the
artist name when “– – – – – – –
pYou cannot memorize the song title or the
artist name of the channel 000.
pThere is a possibility the memorized title is not displayed correctly.
When the memorized track is broadcast
A beep sounds, and a message is displayed. Touch [Yes] to switch to that station and listen to that track.
pIf the memorized track is not selected in the MyMix list, no notification will be pro-
vided even when that track is broadcast.
pNotification may not be provided depend- ing on the situation of the Navigation Sys-
tem.
=Refer to Setting the notification of memor-
ized tracks on the next page.
pIf there is slight difference between the memorized title and the title of the track being broadcast, no notification will be pro- vided even though they are the same song.
Using the direct traffic announcement function
You can listen to a memorized traffic channel by directly calling it up with the TRFC touch key.
Memorize a traffic channel
1Tune in to a Traffic channel.
2Touch and hold [TRFC] for two seconds or more.
The traffic channel will be memorized.
p The channels 000 and 001 can not be mem- orized (although the channel 001 is the de- fault).
Calling up the memorized traffic channel
%Touch [TRFC].
pYou can also perform this operation by touching [TRAFFIC] in the AV source
screen.
pYou can call up a traffic channel from
sources other than XM.
pTo cancel traffic announcement, touch [TRFC Off].
Using the AV Source (Pioneer AV Equipment)
En 107
