Chapter
08
Using the AV Source (Pioneer AV Equipment)
Switching the SIRIUS channel select mode
You can switch modes between the two meth- ods for selecting and listing channels.
All CH Mode:
You can select a channel from all channels. Category Mode:
You can select a channel within selected cate- gory.
%Touch [Mode] to select the desired channel select mode.
Touch [Mode] repeatedly to switch between the two modes.
Switching between the detailed information display and the preset list display
You can switch the left side of the basic screen according to your preference.
%Touch [Detail] (or [Preset]).
Each touch of [Detail] (or [Preset]) changes the detail information display or preset list dis- play.
Detail information display (e.g. All CH Mode)
Preset list display
(e.g. All CH Mode)
SIRIUS channel information
Storing and recalling broadcast stations
If you touch any of the preset tuning keys Preset1 — Preset6 to easily store up to six broadcast stations for later recall with the touch of a key.
1Select the channel that you want to store in memory.
2Touch [Preset] to display the preset list.
3Keep touching a preset tuning key Preset1 — Preset6 until the SIRIUS preset number (e.g., P.CH 1) stops flashing.
The number you have touched will flash in the SIRIUS preset number indicator and then re- main lit. The selected station has been stored in memory.
The next time you touch the same preset tun- ing key Preset1 — Preset6 the station is re- called from memory.
p Up to 18 stations, 6 for each of three SIRIUS bands can be stored in memory.
p You can also touch 
or 
to recall stations assigned to preset tuning keys
Preset1 — Preset6 in the detailed informa- tion display when the “All CH Mode” is se- lected.
