Pioneer AVIC-N5 - page 37

In the selected area, if you touch [City] without
entering the name of the city or area, you can
set the cities or areas that you have searched
in the past from the list. (This function is not
available in the first time and when you have
selected an area that you have never searched
before.)
9 Touchthe street from the list.
Scrollbar
Touchingthe or on the scroll bar scrolls
you through the list and allows you to view the
remaining items.
If an item cannot be displayed in a single line,
touching the to the right of the item allows
you to see the whole line.
!Touchingthe specifies the selected
streetand streetsintersecting it, allowing
youto set an intersectionas your destina-
tion.This is useful when you don’t know the
housenumber of your destinationor can-
notinput the house number of the specified
street.
!Touchingthe displays a map of the place
youhave selected. (Candidate place names
mayappear in the listscreen.)
=Fordetails concerning operations, refer to
When appearsto the rightof thelist on
page49.
pIf the selected streethas only one matching
location,route calculation starts after
touchingthe item.
pAlist appears if multipleoptions exist, se-
lectthe desired one from the list, and pro-
ceedto the next step.
If you did not input the house number in Step
7,the house number input screen comes up
after the [Street] and [City] are determined.
Youshould now input the house number (per-
form Step 7).
pIf there is more than one place for the
housenumber input,or if thereis nosuch
housenumber in that place, arange of
housenumbers are displayed.To start the
routecalculation, touch the range within
thelist you wish to specif y asthe destina-
tion.
pYoucan also see the destination on the
mapby touching the to the right of the
list.
=Fordetails concerning operations, refer to
When appearsto the rightof thelist on
page49.
pIf you press MENU button, the calculation
iscanceled.
pAfter the route calculation,the system start
storingthe map dataaround the routefor
“Memory navi mode”.
pWhenper forming a destination search with
theroute already set, select whether to re-
gardthe specifiedarea as yourdestination
andsearch for a new route, or search for a
routevia that area.
=Fordetails concerning operations, refer to
Editinga waypoint on page 55.
pOncesearched for, the location is automati-
callystored in [DestinationHistory].
=Fordetails concerning operations, refer to
Registeringa pr evious location in Address
Bookon page 62.
10 Drive in accordance with the screen
and voice information.
Yournavigation system gives you the following
information with the timing adjusted to the
speed of your vehicle:
!Distanceto the nextturning point
!Directionof travel
!Roadnumber of thefreeway
!Waypoint (If this is set)
Basic Operation
En 37
Chapter
02
Basic Operation