| Chapter |
Editing the Navigation Utilities | 05 |
|
|
Until the sensor’s initial learning is complete, only the voltage and clock are displayed.
1Switch to Vehicle Dynamics Display.
=For details concerning operations, refer to Switching the current position screen display mode on page 44.
2Touch the left or right instrument. Touch panel keys are displayed.
3Touch the items you want to display.
You can select the following items:
Voltage:
Displays the power supply and voltage sup- plied from the battery to this system.
Acceleration:
Displays acceleration in a forward direction. + sign indicates acceleration while - sign indi- cates deceleration.
Side Acceleration:
Displays acceleration in a side direction, such as when turning. + sign indicates a right turn, while - sign indicates a left turn.
Angular Velocity:
Displays the vehicle’s turning angle over one second (how far it has turned in a second).
Slope:
Displays the vehicle’s vertical movement. + side represents the rising angle, and - side the falling angle.
Direction:
Displays the direction your vehicle is traveling in.
Clock:
Displays the current time.
Adjust Look:
Touch [Adjust Look] to display a screen for se- lecting the panel pattern. Touch one of the pat-
terns from among those displayed onscreen to change the panel to the selected pattern.
pIf you touch [Peak Hold Reset], the maxi- mum and minimum (green line) values indi- cated in [Acceleration] and [Side
Acceleration] are reset.
pYou cannot change the speedometer at the
center.
pSelecting Demo Mode in Settings menu
enables you to perform a demonstration with random values.
Checking the Navigation Status
The navigation status, including the driving status of a vehicle, positioning status by satel- lite, learning status of the 3D sensor and cable connection status, can be checked.
Checking sensor learning status and driving status
1Touch [Settings] in NAVI MENU, then touch [Hardware Info].
2Touch [3D Calibration].
The 3D Calibration Status screen appears.
1
2
3
4
6 7 5
1 Distance
Driving distance is indicated.
2Speed Pulse
Total number of speed pulses is indicated.
3Learning Status
Current driving mode is indicated.
Editing the Navigation Utilities
En 
77
