Operating Instructions
Operating Instructions
HowtoinserttheBatteries
1. Remove the battery cover by pulling it according to the arrow direction.
2. Insert new batteries making sure that the (+) and
3. Reattach the cover by sliding it back into position.
NOTICE
Use 2 AAA(1.5volt) batteries.
Do not use rechargeable batteries.
StorageandTipsforusingtheRemoteController
•The remote controller may be stored by mounting it on a wall.
•To operate the room air conditioner, aim the remote controller at the signal receptor.
Signal Receptor
Receives the signals from the remote control.(Signal receiving sound: two short beeps or one long beep.)
Operation Indication Lamps
DOOR
88
PLASMA
On/Off | : Lights up during the system operation. |
|
Sleep Mode | : Lights up during Sleep Mode Auto operation. (Without plasma model only) | |
Timer | : Lights up during Timer operation. |
|
| Lights up during Sleep Mode Auto operation. |
|
| (Plasma model only) |
|
Defrost Mode | : Lights up during Defrost Mode or *Hot |
|
| Start operation (Heat pump model only) |
|
OUTDOOR UNIT | : Lights up during outdoor unit operation. |
|
OPERATION | (Cooling model only) |
|
Display | : Indicates the setting temperature | Operation indicating |
|
| lamps |
Plasma | : Lights up during plasma operation (Plasma model only) |
|
*Hot Start operation: Stops the indoor fan in Heating Operation to prevent cold air from blowing out from unit.