Pioneer AVIC-N5 External Unit, Connecting a Bluetooth audio player, Operating the external unit

	Chapter
Using the AV Source (Pioneer AV Equipment)	08

Connecting a Bluetooth audio player

%Touch [Connection Open] in Function menu to turn the connection open on. Pairing is displayed. This navigation system is now on standby for connection from Bluetooth audio player.

If your Bluetooth audio player is set ready for Bluetooth wireless connection, the connection to this navigation system will be automatically established.

p Before you can use audio players you may need to enter the PIN code into this naviga- tion system. If your player requires a PIN code to establish a connection, look for the code on the player or in its accompanying documentation. Enter the PIN code refer- ring to page 119.

Disconnecting a Bluetooth audio player

%Touch [Disconnect] in Function menu. After the disconnection is completed,

No Connection is displayed.

Displaying BD (Bluetooth Device) address

%Touch [Device Info] in Function menu to display the BD address.

Various information regarding the Bluetooth wireless technology are displayed.

!BD ADDRESS (system address)

!SYSTEM NAME (system name)

!SYSTEM VER. (version)

!BT MODULE VER. (Bluetooth module version)

External Unit

Operating the external unit

1 2

The term “external unit” refers to a Pioneer product (such as one available in the future) that, although incompatible as a source, en- ables control of basic functions by the naviga- tion system. Two external units can be controlled by the navigation system. When two external units are connected, the naviga- tion system allocates them to external unit 1 or external unit 2.

For details concerning operation, refer to the external unit’s operation manual. This section provides information on external unit opera- tions with the navigation system that differ from those described in the external unit’s op- eration manual.

pOperation varies depending on the external unit connected. (In some cases, the exter- nal unit may not respond.)

1Source icon

2External unit indicator

1Touch [EXT-1] or [EXT-2] in AV Source screen to select the external unit.

=Refer to step 3 in How to Display each Menu on page 86.

2Touch any touch panel key to operate the external unit.

Using the AV Source (Pioneer AV Equipment)

En 129