Pioneer AVIC-N5 Initial Settings, Adjusting initial settings, Editing the PIN code

	Chapter
Customizing the AV Source Setting	09

pThe DivX subtitles will be displayed even when the subtitle file setting is on if no cor- responding subtitle files exist.

pUp to three lines can be displayed at once.

Initial Settings

Adjusting initial settings

1

Initial settings lets you perform initial set up of different settings for navigation system.

1Function display

1Touch [Off] in AV Source screen to turn source off.

=For details, refer to Selecting an AV source on page 39.

2Press MENU button to change to AV MENU.

3Touch [Initial].

Setting the rear output and subwoofer controller

This navigation system’s rear output (rear speaker leads output and RCA rear output) can be used for full-range speaker

(Rear SP Full) or subwoofer (Rear SP Sub. W) connection. If you switch the rear output set- ting to Rear SP Sub. W, you can connect a rear speaker lead directly to a subwoofer with- out using an auxiliary amp. Initially, the navi- gation system is set for rear full-range speaker connection (Rear SP Full). When rear output is connected to full-range speakers (when

Rear SP Full is selected), you can connect the RCA subwoofer output to a subwoofer. In this case, you can select whether to use the sub- woofer controller’s (low pass filter, phase) built-in Preout Sub. W or the auxiliary Preout Full.

pWhen 5.1CH setting is [On], the rear out- put and subwoofer setting is not available.

1Touch [Rear SP] in Initial menu.

2Touch [Rear SP] to switch the rear out- put setting.

When no subwoofer is connected to the rear output, select Full.

When a subwoofer is connected to the rear output, select Sub. W.

p When the rear output setting is Sub. W, you cannot change the subwoofer control- ler.

3Touch [Preout] to switch the subwoofer output or non fading output.

p Even if you change this setting, there is no output unless you turn [Non Fading] or [Sub Woofer] in Sound menu [On].

=For details, refer to Using non fading output on page 133.

=For details, refer to Using subwoofer output

on page 133.

pIf you change the subwoofer controller (Rear SP), the subwoofer output (Sub Woofer) and non fading output

(Non Fading) in Sound menu return to the

factory settings.

pBoth rear speaker leads output and RCA rear output are switched simultaneously in this setting.

Editing the PIN code

You can edit the PIN code you like. Use this function when you need to change the PIN code from the default setting.

1 Touch [PIN Edit] in Initial menu.

Customizing the AV Source Setting

En 137