Pioneer AVIC-N5 operation manual Setup adjustments, Setting the video input

	Chapter
Customizing the AV Source Setting	09

1Press AV button to switch AV operation screen.

2Press MENU button and then touch [REAR SCREEN].

Each touch of [REAR SCREEN] changes the settings as follows:

!Mirror — The video on the front screen of the navigation unit is output to the “Rear display”

!DVD — The video and sound of the DVDs are output to the “Rear display”

!AV1 — The video and sound of AV-1 are output to the “Rear display”

!AV2 — The video and sound of AV-2 are

output to the “Rear display”

pWhen [Mirror] is selected, the following re- strictions are applied to “Rear display”.

—When selecting [Rear View] in the map display, nothing is displayed.

—All sounds cannot be output for “Rear display”.

—The map screen navigation images out- put to the “Rear display” differ from standard NTSC format images. There-

fore, their quality will be inferior to the images that appear on the front screen.

pWhen [DVD] is selected, the following re- strictions are applied to “Rear display”.

— When a CD or MP3/WMA/AAC disc is

set in the built-in DVD drive, nothing is output.

pWhen [AV1] or [AV2] is selected, the follow- ing restrictions are applied to “Rear dis- play”.

—The “Video image” and sound are output only when AV-1/AV-2 has both video and sound.

—The “Video image” and sound are output only when the appropriate setting on [AV1 Input] or [AV2 Input].

Setup adjustments

1

1System menu display

=Refer to step 3 in How to Display each Menu on page 86.

Setting the video input

You can switch the setting according to the	Customizing
% Touch [AV1 Input] or [AV2 Input] in
connected component.
p Select [Video] to watch video of a con-
nected component as AV-1 or AV-2
source.
System menu.	the
Each touch of [AV1 Input] or [AV2 Input]	AV
changes the settings as follows:
AV1 Input:	Source
! Off — No video component is connected
! Video — External video component
! EXT — Pioneer external unit connected	Setting
with RCA video cable
! M-DVD — DVD player or Multi-DVD player
connected with IP-BUS cable

pWhen a DVD player or Multi-DVD player is connected with IP-BUS cable and RCA video cable, select [M-DVD]. When the AV source is [M-DVD], the “Video image” of the DVD player or Multi-DVD player can be

displayed.

AV2 Input:

!Off — No video component is connected

!Video — External video component

pWhen a Pioneer external unit is connected with an IP-BUS cable, select [EXT]. When the AV source is [EXT], the “Video image” of the Pioneer external unit can be displayed.

En 139