Basic Operation
Chapter
02
1Press and hold OPEN/CLOSE button. Flap Setup screen appears.
2Touch [Flap Set Back].
Touching [Flap Set Back] switches between [On] and [Off].
Setting the automatic open function
When you do not wish the display to open/ close automatically, you can set the automatic open function to the manual mode.
1Press and hold OPEN/CLOSE button. Flap Setup screen appears.
2Touch [Auto Flap].
Each touch of [Auto Flap] changes the set- tings as follows:
!Manual — You have to press OPEN/CLOSE button to open/close the display
!Auto — The display automatically opens/
closes when power to navigation system is turned on
Removing the front panel
1Press DETACH button to remove the front panel.
2Gently grip the right side of the front panel and slowly pull it outward.
Take care not to drop the front panel and pro- tect it from contact with water or other fluids to prevent permanent damage.
3Put the front panel into provided pro- tective case for safe keeping.
Attaching the front panel
%Replace the front panel by holding it
upright to this product and clipping it se- curely into the mounting hooks.
Basic Operation
Protecting Your Product from Theft
The front panel can be detached from the dis- play unit to discourage theft, as described below.
CAUTION
!Never grip the display and the buttons tightly or use force when removing or attaching.
!Avoid subjecting the front panel to excessive shocks.
!Keep the front panel out of direct sunlight and high temperatures.
!After detaching the front panel, keep it in a safe place so it is not scratched or damaged.
En 33