Sharp LC-60LE822ERU When you change the antenna connection setting, Single satellite setting

Quick guide

2When you change the antenna connection setting:

Press c/dto select “Change setting” on the DVB-S/S2 setting screen in the left column, and then press ;.

• The antenna connection setting screen is displayed.

Single satellite

2 satellites on 22kHz switchbox

2 satellites on toneburst switchbox

Max. 4 satellites on DiSEqC multiswitch

Communal satellite system

NOTE

•You can select the antenna connection method from the five types. Consult your dealers before using a method other than “Single satellite”.

E“Single satellite” setting

1Press a/bto select “Single satellite”, and then press ;.

2Press a/bto select “SAT1 [None]” to display the satellite broadcasts that the TV can receive, and then press ;.

SAT1 [None]

Next

3Press a/b/c/dto select your favorite satellite, and then press ;.

•You cannot select “Next” unless you set the satellite broadcast in step 3.

Atlantic Bird 3

4Press a/bto select “Next”, and then press

;.

SAT1 [ASTRA 1]

Next

5Press c/dto select “Yes (0/22kHz)” or “No” to set the LNB frequency, and then press ;.

Yes (0/22kHz) No

6Press a/bto select the item and press c/d to adjust 9,000 MHz to 12,000 MHz to the appropriate value.

EXAMPLE

SAT1 low

SAT1 high

OK

7Press a/bto select “OK”, and then press

;.

After completing this setting, the screen switches to the DVB-S/S2 setting screen shown in the left column on page 13.

NOTE

•Follow the instructions on the screen for “2 satellites on 22kHz switchbox”, “2 satellites on toneburst switchbox”, “Max. 4 satellites on DiSEqC multiswitch” and “Communal satellite system” settings.

•To set multiple satellite channels, go to “Max. 4 satellites on DiSEqC multiswitch”.

14