12

Quick guide

Searching for cable broadcasts

To change each item to the appropriate

settings:

Press a/b to select the menu, and then
press ;.
Scrambled stations [Yes]
Search method [Channel]
Start frequency
Network ID [None]
Symbol rate 1
Symbol rate 2
QAM modulation 1
QAM modulation 2
Reset
Search start
Press a/b/c/d or 0_9 to select or input
the appropriate item/value, and then press
;.
Press a/b to select “Search start”, and then
press ;.
Press c/d to select “Yes” to start searching
cable broadcasts, and then press ;.
The TV searches for, sorts and stores all
the receivable TV stations according to their
settings and the connected antenna.
To abort the initial auto installation in progress, press 6.

After searching for DVB-C channels, the

screen switches to the “Satellite search”

setting (Page 13).

H
The “Scrambled stations” menu and the “Search method”
menu are not displayed on the screen as each menu item is
fixed.
The value of “Start frequency” and “Network ID” should be set
to the value specified by the cable provider.
E
1
2
3
4
5
•
•
•
Menu Description Selectable items
Scrambled
stations
Specifies if you
need to add pay-TV
services.
Yes, No
Search
method
Specifies how you
search channels.
Channel: Extracts all
of information from a
channel (quick, but
needs corresponding
TV stations).
Frequency: Checks
every frequency in
range (slow).
Quick*2: All services
are searched by
one frequency. This
menu works only
when your cable
provider provides
the frequency and
the network ID (e.g.,
Homing channel).
Start
frequency
From 47.0_858.0
MHz
Network ID
Specifies the network.
Set this to register
only the specified
network ID without
registering any special
services.
None, 0_65535
Symbol rate
1*1
The symbol rates
are specified by the
cable provider. Input
the value received for
CATV.
1000_9000
Symbol rate
2*1
The symbol rates
are specified by the
cable provider. Input
the value received for
CATV.
1000_9000
QAM
modulation 1 16, 32, 64, 128, 256
QAM
modulation 2
None, 16, 32, 64,
128, 256
Set up “Symbol rate 2” if the cable provider uses several
symbol rates.
When “Quick” is selected, “Scrambled stations” is automatically
set to “No”.
When “Quick” is selected, “None” for the “Network ID” menu
cannot be selected.
H
When you set “Sweden” in the country setting and select
“Cable” for the searching format, you can select the cable
provider “ComHem”. Follow the screen prompts.

Analogue broadcast setting

The TV searches for, sorts and stores all the

receivable TV stations according to their

settings and the connected antenna.

To abort the initial auto installation in progress, press 6.

After searching for analogue channels, the

screen switches to the “Satellite search”

setting (Page 13).

I
J
J
•
•