38
Useful viewing functions

Display information regarding time shift

Channel display
Channel information displays by pressing p on the remote
control unit.
Audio (ENG) STEREO
Video
Subtitle Off
>> New information
The time shift ready icon shows up when
READY is pressed and the TV is recording the
programme.
The status icon shows up depending on what is
shown on the screen.
Counter
The counter displays when you set “On” in “Display the Time
shift memory” (Go to “Setup” > “Option” > “Time shift setting”).
Time shift
Memory used:
The grey bar shows how much memory is in use.
This blue point shows how much time has
progressed.
“FULL” shows up when the grey bar reaches
the right edge. The TV starts overwriting the
previously recorded data.
NOTE
You can also call up the information above by pressing
CONTROL on the remote control unit or select “Control (Time
shift)” from “Option” > “Option for view”.
•
Option

Auto input selection

You can choose whether or not to switch the input
source automatically when receiving an AQUOS LINK or
an Euro SCART compatible signal on the TV during time
shift operations.

Go to “Menu” > “Setup” > “Option” > “Time

shift setting” > “Auto input selection”.

Item
Enable
Release time shift when receiving
an AQUOS LINK or a Euro SCART
compatible signal. Switch input source
automatically.
Disable
Time shift continues to work. The
TV does not switch input source
automatically even when receiving
an AQUOS LINK or a Euro SCART
compatible signal.