13

Searching for satellite broadcasts

Press c/d to select “Yes”, and then press ;.
Yes No
If you do not perform “Satellite search” setting, select
“No”, and then press ;.
The current DVB-S/S2 setting screen is displayed.
Next
other
Satellite
LNB Frequency
Low High
Satellite System
Max. 4 satellites on DiSEqC multiswitch
Change setting
You must first complete “Change setting” before moving
to the “Next” setting.

When starting the satellite search

after setting the scrambled stations:

Press c/d to select “Next”, and then press
;.
NOTE
When you perform the initial auto installation, “Next” cannot be
selected. Completing “Change setting” enables you to select
“Next”.
Start search
other
Satellite
Symbol rate 1 Symbol rate 2
Scrambled stations: No
Change setting
•
•
•
1
•

Start search:

DVB-S/S2 channel searching.
Press c/d to select “Start search”, and then
press ;.
The TV searches for, sorts and stores all the
receivable TV stations according to their
settings and the connected antenna.
To abort the initial auto installation in progress, press 6.

Change setting:

Press c/d to select “Change setting”, and
then press ;.
The setting screen of “Scrambled stations” and “Symbol
rate” is displayed.
Scrambled stations [No]
Search start
SAT1-Symbol rate 1
SAT1-Symbol rate 2
SAT2-Symbol rate 1
Yes No
Press a/b to select “Scrambled stations”,
and then press ;.
Scrambled stations: Specifies if you need to add pay-TV
services.
Press c/d to select “Yes”, and then press
;.
Press a/b to select the symbol rate you
want to modify, and then press ;.
Symbol rate: You need to set each symbol rate of all
the satellite broadcasts that the TV can receive (eight
is the maximum number of symbol rates that can be
displayed).
Press c/d to select “Search start”, and then
press ;.
The TV searches for, sorts and stores all the
receivable TV stations according to their
settings and the connected antenna.
To abort the initial auto installation in progress, press 6.
E
1
2
•
E
1
•
2
•
3
4
•
5
6
•
Quick guide