43

Additional features

Option

Colour system

You can change the colour system to one that is
compatible with the image on the screen.

Go to “Menu” > “Setup” > “Option” > “Colour

system”.

NOTE
The factory preset value is “Auto”.
If “Auto” is selected, the colour system for each channel is
automatically set. If an image does not display clearly, select
another colour system (e.g., “PAL”, “SECAM”).
Option

Headphone/Audio out select

You can select which device is used for outputting audio.

Go to “Menu” > “Setup” > “Option” >

“Terminal setting” > “Headphone/Audio out

select”.

Item
Headphone Output audio through headphones.
Audio out Output audio through an A/V receiver or
surround audio controller.
CAUTION
This terminal is also used for headphones. Reduce the volume
before using headphones. Overwhelming sound may damage
your hearing.
NOTE
If you select “Audio out” when a cable is inserted in the HDMI
2/EXT 3 AUDIO (L/R) terminal, the TV speakers are muted.
When you select “Audio out”, you can adjust the TV sound
volume with the Yl/k buttons on the TV or i+/-
buttons on the remote control unit.
•
•
•
•
•
Option

Channel selecting effect

This function shows a screen effect when choosing or
changing channels.

Go to “Menu” > “Setup” > “Option” > “Screen

effect” > “Channel selecting effect”.

Option

Illumination

This function makes the LED on the front of TV
illuminated in several ways.

Go to “Menu” > “Setup” > “Option” >

“Illumination”.

Item
Off The LED is not illuminated.
Standby The LED is illuminated while the TV is in
standby mode.
Watch The LED is illuminated while you watch
TV.
Always The LED is illuminated all the time.
NOTE
The factory default for this item is “Watch”. Set to “Off” if you do
not want the LED to illuminate.
•
Other useful features