5

What is the Menu?

You need to call up the OSD to perform settings for the TV. The OSD for the settings is called “Menu”. The “Menu”
enables various settings and adjustments.

Basic operation

Display the Menu

screen

Press @ and the “Menu” screen
displays.

Exit the Menu screen

The operation will exit the “Menu”
screen if you press > before it is
completed.

Select an item

The “Menu” is classified by setting categories for improving TV viewing.
Selecting in the Menu
Press c/d to select the desired menu, and then press ;.
Press 6 to return to the previous menu category.
Press c/d to select the desired sub-menu, and then press
;.
Press a/b to select the item you want to select/adjust, and
then press ;.
Setup
Backlight
AV mode
Picture
OPC
[Off]
CH list
:Back
:Enter
Menu
Contrast
Selecting options
Press a/b or c/d to configure
the control for improving TV
viewing, and then press ;.
EXAMPLE
Backlight
Yes No
NOTE
Refer to the guide display below the menu
bar to see when to press the ; button.
•
LCFONT This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-to-read
characters on LCD screens.
NOTE
“Menu” options differ in the selected input modes, but the operating procedures are the same.
Items with 4 cannot be selected for various reasons.
Some items cannot be selected depending on signal types, optional settings or connected devices.
•
•
•
Introduction